|
Piston Rod Working Platform HK1-0128 | |
|
left part is for storing parts | |
|
Quantity of Storing Boxes： |
3×4=12 pcs |
| Material of working platform and storing box is stainless steel. | |
|
There're four 35mm-diameter-holes for putting the rods at the front side, the hole spacing is 60mm. |
|
|
middle part is for nut tightening | |
| Air Source Pressure： | 0.5MPa |
|
Rod Clamping Mode： |
Hydraulic Clamping |
|
Max. Torque： |
3~30N.m |
|
Tighten Mode： |
Continuous Torque by Servo Motor |
| Productivity： | 10～15s/pc |
| Length of Rod： | 100～500mm |
| Diameter of Rod： | Φ8～28mm |
| Torque Accuracy： | ±1% |
| right part is for oil greasing | |
| There're four kinds of oil greasing jigs on the machine, one kind for each time. | |
|
720×1850×1800mm | |
